Power

Anker SOLIX C200 DC Review: Pocket Power for Outages

A black smartphone on a gray surface with a white charging cable plugged in
Illustrative photo by Andreas Haslinger on Unsplash, not the exact product reviewed.

Disclosure: this post contains Amazon affiliate links. If you buy through them, we may earn a small commission at no extra cost to you.

Winter outages on the Gulf Coast tend to be short, but they arrive in houses built for heat. When a hard freeze or an ice storm takes the power for a night or two, the phones, the lights, the weather radio and the work laptop all run down at once, in a house that gets colder every hour. Most households do not need a refrigerator-class power station for that. They need a dependable battery that keeps the small electronics alive from the one warm room, and that rides in the car the rest of the year.

The Anker SOLIX C200 DC is built for that job: a 192 watt-hour lithium iron phosphate (LiFePO4) battery with five USB ports and 200 watts of total output, which Anker rates to recharge to 80 percent in about 1.3 hours through its 140 watt USB-C port, though it has no AC outlet and ships without a wall charger.

Who It Is For

The C200 DC is for a household whose outage load list is all USB: phones, tablets, one or two laptops, USB-rechargeable headlamps and lanterns, a weather radio or a GMRS handheld that charges over USB. Anker rates its USB-C2 port at 100 watts and its USB-C3 port at 140 watts, and the power table in Anker’s guide shows the two running together at 100 watts each, so two people can keep laptops going through a work-from-home outage.

It also suits a car kit. At 1.9 kilograms (4.2 pounds) and 10 by 11 by 18.5 centimeters, it stands on a nightstand or rides in a console bin, it recharges from a car through a cable Anker sells separately, and Anker rates it to discharge, that is, to power your devices, down to -20 °C (-4 °F). Charging is a different matter, covered below.

It is not for anything with a wall plug. There is no AC outlet and, by Anker’s own comparison chart, no 12 volt car-style output socket, so a refrigerator, a coffee maker, a fan with an AC cord or a space heater is off the list. No battery this size is a heater anyway; our guide to staying warm when the power goes out in winter covers that problem.

Key Specs

Spec Anker SOLIX C200 DC, model A1727 (Anker figures)
Capacity and chemistry 192 Wh, LFP (LiFePO4)
Total output 200 W max
USB-C3 (input and output) 140 W max either way, PD 3.1
USB-C2 and USB-C1 output 100 W max and 15 W max
USB-A output 2 ports, 12 W each; USB-A and USB-C1 together 20 W
AC outlet, 12 V car-style output, light, UPS None
Solar input 11 to 28 V, 8.2 A max, 100 W max, XT-60 connector
Car input Through the solar and car input; cable sold separately
Recharge time 80 percent in about 1.3 hours through the 140 W USB-C port
Charging temperature 0 to 40 °C (32 to 104 °F)
Discharging temperature -20 to 40 °C (-4 to 104 °F)
Size and weight 10.0 x 11.0 x 18.5 cm (3.94 x 4.33 x 7.28 in); 1.9 kg (4.2 lb)
In the box Power station, USB-C to USB-C cable, safety manual, warranty information; no wall charger
App and warranty Anker app over Bluetooth and Wi-Fi; 3 years
Cycle life and storage temperature Not published in the documents we read

What the Manual Says About Setup and Limits

There is no paper manual. Anker provides the user guide electronically, through a QR code on the safety booklet. Read it before the first outage, not during one.

Bring your own charger. Anker says any USB-C Power Delivery charger of 18 watts (9 V, 2 A) or more will charge the C200 DC, but full speed needs a 140 watt charger, and only the USB-C3 port accepts input. The guide also calls for a 5 A rated USB-C cable to get the full 100 or 140 watts.

Solar and car charging have rules. The solar input takes an 11 to 28 volt panel with an XT-60 connector, up to 100 watts, and Anker recommends its own 100 or 60 watt panel. Anker says the C200 DC is not compatible with its SOLIX PS30 (or other 5 V, 3 A USB-C panels), PS200 or PS400. The solar and car cables are sold separately.

It switches itself off. With the outputs off and no load, the station powers down after two hours; the app can change that, and Anker recommends not setting it to “never.” The port timers cannot be changed: with no input, the USB-A and USB-C1 ports shut off if the load stays under 60 mA for two hours, and USB-C2 and C3 under 100 mA. If something that draws very little is plugged in overnight, check in the morning that the port is still on; replugging the cable wakes it.

Temperature alerts mean stop. When the Low-Temperature Alert icon shows, the guide says to stop using the station until it disappears; the High-Temperature Alert means stop and let it cool. Charging is rated only from 0 to 40 °C (32 to 104 °F), so in a freeze, bring the unit into the heated part of the house before you plug it in. Our guide to power stations in cold weather covers that routine.

Keep it upright and topped up. Anker says the C200 DC must be used and stored upright. For storage, turn off the main power, keep it dry and cool, check the charge each week, fully charge it if it falls below 30 percent, and charge it to 100 percent once every three months. Anker warns that a unit left at low charge for a long time can self-discharge to the point of a shorter battery life.

Mind what you plug in. The guide warns of a fire risk when connecting other equipment to the high-power USB-C ports and says to connect only equipment that meets the IEC 62368-1 safety standard. Use connected equipment and accessories that meet those specific safety requirements.

What We Like

Laptop-class ports in a small box. Two USB-C ports at 100 and 140 watts are the reason to choose this over a phone-sized pack, and they are what a household working through an outage needs.

A fast refill before the cold arrives. With a 140 watt charger, a unit stored at partial charge can be brought up between the freeze warning and nightfall.

It works in the cold, within limits. A discharge range down to -4 °F covers a Gulf Coast cold snap, so it can keep phones and lights going in a cold car or an unheated room, and the screen shows the estimated time to empty, so you plan from the unit’s own reading. LFP cells and a three-year warranty suit a battery that sits in a kit between outages.

Limitations

DC only. No AC outlet, no 12 volt car socket and no light. No wall charger, solar cable or car cable comes in the box, and the advertised recharge speed needs a 140 watt USB-C charger.

No charging below freezing. The 32 °F floor means it cannot be recharged in a freezing car or garage; it has to come inside first.

Gaps in the published specs. The pages we read give no cycle-life figure and no storage temperature range, only “dry and cool.” The top of the operating range, 104 °F, is a number a closed car in a Gulf Coast summer can pass, so treat the car kit as a seasonal home. Solar is capped at 100 watts, and several of Anker’s own panels are not compatible.

Alternatives

The Anker SOLIX C300 DC is the bigger sibling: 288 watt-hours, 300 watts, two 140 watt two-way USB-C ports, a 120 watt car socket and a pop-out light, at 6.17 pounds. Our power bank roundup compares it with the C200 DC and two smaller packs.

The Goal Zero Sherpa 100PD holds about half the energy (Goal Zero rates it at 94.7 watt-hours) but weighs 1.5 pounds, adds a 15 watt wireless charging pad, and is described by Goal Zero as airline-approved. Its operating range starts at 32 °F, so it is a warm-room device in a freeze.

If the load list includes anything with a wall plug, step up to a small station with an AC inverter: the Jackery Explorer 300 or the EcoFlow RIVER 3. And if you came here from our Anker 60,000mAh power bank review, that pack is out of stock on Amazon; the C200 DC is the in-stock Anker that takes its place.

Common Questions

Can the Anker SOLIX C200 DC run a space heater or an electric blanket?

No. It has no AC outlet, and Anker rates its total output at 200 watts. Keep it for the electronics and plan warmth separately with layers, sleeping bags and one shared warm room.

Can I charge it in a cold car or garage?

Not below freezing. Anker rates charging from 0 to 40 °C (32 to 104 °F). It can power devices down to -4 °F, but to recharge it in a freeze, bring it indoors first.

Does it come with a charger?

No. The box holds a USB-C to USB-C cable but no wall adapter. Anker says any USB-C PD charger of 18 watts or more works, and a 140 watt charger is needed for full speed.

Bottom Line

The Anker SOLIX C200 DC is a power bank that grew up: 192 watt-hours of LFP storage, two laptop-class USB-C ports, a fast refill and a discharge range that covers a Gulf Coast freeze, in a 4.2-pound box with no AC outlet. In a winter outage it keeps the phones, lights, radio and laptops going from the warm room, and it earns its place in the car kit the rest of the year. Buy a 140 watt USB-C charger with it, store it the way Anker’s guide asks, and bring it inside before you charge it in the cold.

Some links on this page are Amazon affiliate links. If you buy through them, Ultimate Prepper’s Guide may earn a small commission at no extra cost to you.